Get Admission Alerts by SMS
Last Date : 30 Apr 2010 Exam Date : 05 Jun 2010 Exam Date (Set II) : 06 Jun 2010
Candidates
who are appearing in the qualifying examination can RESERVATION OF
SEATS: Seats are reserved for various categories as mentioned below
Certificate Programmes:
(i) Punjab State 75%
(ii) Other States & U.T.S 25%
Statutory Reservations (in all above programmes):
15% for Schedule Castes, 7.5% for Schedule Tribes, 3% for Physically
Handicapped and 27% for Other Backward Classes (non-creamy layer).
NRI/NRI Sponsored*: 10% in Diploma and degree programmes (over and above the sanctioned seats) Latest Instructions of Government of India shall apply at the time ofadmission against this category.
Application Form and Examination Fee:
The Brochure containing information about the Institute, syllabi for
Entrance Test for different programmes and application form for
Entrance Test is available from February 25, 2010 at SLIET, Longowal
(Distt. Sangrur)-148106, Punjab, on payment of Rs. 325/- at the
Institute's Counter or through Post by sending a Bank Draft of Rs.350/-
in favour of Director, SLIET, payable at Longowal / Sangrur. The
complete application form along with examination fee (in the form of DD
or Cash receipt) of Rs.500/- (Rs.250/- for SC/ST)
should be sent to the Chairman, SET-2010. Sant Longowal Institute of
Engineering & Technology, Longowal-148106, Distt. Sangrur (Punjab) on or before April, 30, 2010.
Information Brochure shall also be available at the following Sale Centres and Axis Bank Branches by Cash payment of Rs.340/- only, from March 01, 2010:
1 BAV Inter College, Subhash Bazar, Meerut (U.P.)
2 Beant College of Engineering & Technology, Gurdaspur (Punjab)
3 Central Academy, Sector-4, Vikas Nagar, Lucknow (U.P.)
4 Directorate of Technical Education & Indl. Training, Plot No.1, Sector 36-A, Chandigarh
5 DAV College, Bibi Wala Road, Bathinda (Punjab)
6 DAV Institute of Engineering & Technology, Kabir Nagar, Jalandhar (Punjab)
7 Govt. Boys Senior Secondary School, Near Bus Stand, Hamirpur (H.P.)
8 Guru Nanak Dev Engineering College, Ludhiana (Punjab)
9 Madan Mohan Malviya Engineering College,
10 Gorakhpur (U.P.) Multani Mai Modi College, Patiala
11 (Punjab) National Institute of Technology, Kurukshetra
12 (Haryana) Patna Science College, Ashok Raj Path, Patna (Bihar) Shaheed Bhagat Singh College of Engg. & Tech.,
13 Ferozepur (Punjab) YMCA Institute of Engineering, Sector 6, Faridbad (Haryana)
Axis Bank Branches (City's Main Branch) Andhra Pradesh: Hyderabad, Vijayawada. Assam: Guwahati, Jorhat. Bihar: Bhagalpur, Darbhanga, Muzaffarpur, Patna. Chandigarh. Chattisgarh: Bilaspur, Raipur. Gujarat: Ahmedabad, Gandhinagar, Surat, Vadodra. Haryana: Ambala, Hissar, Kurukshetra, Rohtak, Sirsa. Himachal Pradesh: Shimla. Jammu & Kashmir: Jammu. Jharkhand: Dhanbad, Jamshedpur, Ranchi. Karnataka: Bangalore. Madhya Pradesh: Bhopal, Gwalior, Jabalpur. Maharashtra: Jalgaon, Nagpur, Nanded. New Delhi. Orissa: Bhubaneshwar, Puri. Punjab: Amritsar, Abohar, Barnala, Bathinda, Faridkot, Ferozepur, Gurdaspur, Hoshiarpur, Jalandhar, Khanna, Ludhiana, Mansa, Moga, Nawanshashr, Patiala, Roopnagar (Ropar), Sangrur. Rajasthan: Jaipur, Kota. Tamilnadu: Chennai. Uttar Pradesh: Agra, Allahabad, Bareilly, Ghaziabad, Gorakhpur, Kanpur, Lucknow, Meerut, Saharanpur. Uttrakhand: Dehradun, Rudrapur. West Bengal: Kolkata.
Deemed University
Longowal
Distt. Sangrur
Punjab
Phone-No:
01672-280072, 284782, 284815, 284816
Fax:
01672-280072, 280057,280059
Email: mailto:chairmanset2007@gmail.com
Website:
www.sliet.ac.in
Sant Longowal Institute of Engineering & Technology (SLIET) has been established by the Government of India to provide technical education in emerging areas of Engineering & Technology. The programmes in the Institute provide direct entry at Certificate, Diploma, Degree, M.Tech. and MBA levels and vertical mobility at Diploma and Degree levels of education, besides nonformal education programmes. The Institute has acquired the status of a Deemed-to- be-University in the year 2007
SLIET Entrance Test SET-I for admission to Certificate Programme will consist of two papers each of two hours duration.
Paper-I : This paper will have 100 objective type questions of 100 marks from English, General knowledge, Mental Aptitude and Mathematics. Paper-II: This paper will also consist of 100 objective type questions of 100 marks from Physics and Chemistry.
SLIET Entrance Test SET-II for admission to Diploma Programme will consist of two papers each of two hours duration.
Paper-I : This paper will have 100 objective types questions of 100 marks from English, General Knowledge and Mathematics. Paper-II : This paper will also consist of 100 objective type questions of 100 marks from Physics and Chemistry.
SLIET Entrance Test SET-III for admission to Degree Programme will consist of two papers each of two hours duration.
Paper-I : This paper will have 100 objective type questions of 100 marks from English, General Knowledge, Mental Aptitude, Mathematics, Physics and Chemistry. Paper-II : This paper will also consist of 100 objective type questions of 100 marks from Basics of Engineering.
SET - VI There will be one paper consisting of 100 objective type questions of two hours duration and of 100 marks.
- Each paper is of 100 marks
- There will not be any negative marking.
- Student with 50% marks in Degree programme is eligible for admission to M.Tech.programme.
- Master’s Degree in Engineering/Technology/Science/Humanities/Management with 55% of marks (50% for SC/ST)
- Note that matric pass are eligible for Certificate, 10+2 pass are eligible for Diploma, Diploma Pass are eligible for Degree and Degree pass are eligible for M.Tech./ MBA programme
CERTIFICATE PROGRAMME Entry Qualification: The minimum qualification for admission to the Certificate programme is Matric pass (Pass in English, Mathematics and Science is compulsory) from a State Secondary Education Board/CBSE/ICSE/National Open School or equivalent.
DIPLOMA PROGRAMME Entry Qualification: The minimum qualification for admission to the Diploma programmes is 10+2 pass with Physics, Chemistry & Mathematics from a recognized board/university or a Certificate pass from SLIET in any trade. The candidates who have studied Biotechnology or Computer Science or Biology instead of Chemistry at 10+2 level are also eligible.
DEGREE PROGRAMME Entry Qualification: All candidates who have passed Diploma course in any discipline from SLIET or from any other polytechnic affiliated with any State Board of Technical Education and approved by All India Council for Technical Education (AICTE), are eligible to compete for admission to any of the Degree programmes.
1. Certificate Programmes (2 years Duration):
(1) Servicing & Maintenance of Electronics Instruments; (2) Computer Applications; (3) Food Technology; (4) Air-Conditioning & Refrigeration; (5) Foundry & Forging; (6) Tool & Die Technology; (7) Auto & Farm Machinery; (8) Welding Technology; (9) Servicing & Maintenance of Medical Instruments; (10) Maintenance of Television; (11) Maintenance of Electrical Equipments; (12) Paper & Printing Technology
2. Diploma Programmes (2 years Duration):
(1) Chemical Technology; (2) Computer Science & Engineering; (3) Computer Science & Applications; (4) Electronics & Communication Engineering; (5) Food Technology; (6) Foundry Technology (7) Instrumentation & Process Control; (8) Industrial & Production Engineering; (9) Maintenance & Plant Engineering; (10) Welding Technology
3. Degree Programmes (3 years Duration):
(1) Chemical Engineering (Polymer Technology) (2) Chemical Engineering (3) Computer Science & Engineering; (4) Electronics & Communication Engineering; (5) Food Technology; (6) Instrumentation & Control Engineering; (7) Mechanical Engineering (Manufacturing Engineering); (8) Mechanical Engineering (Welding Technology); (9) Information Technology
MBA and M.Tech. Programmes: (2 years Duration):
(1) Manufacturing Systems Engineering; (2) Food Engineering & Technology; (3) Instrumentation & Control Engineering; (4) Polymer (5) Electronics & Communication Engineering (6) Mechanical Engineering (Specialization in Welding and Fabrication) (7) Master of Business Administration (MBA)
Important Dates
|
Last Date | Friday, 30 Apr, 2010 |
Exam Date | Saturday, 05 Jun, 2010 |
Exam Date (Set II) | Sunday, 06 Jun, 2010 |
|
Get Admission Alerts by SMS
|